Tell Us What You're Looking For.
Please Leave your message you want to know! We will respond to your inquiry within 24 hours!
Pakistan UHP Graphite Electrode, EAF Graphite Electrode | Hgraphite
UHP graphite electrode is often used for ultra high power electric arc furnaces (EAF) with current density greater than 25 A/cm2. The length of EAF graphite electrodes can be up to 2900mm. They are usually packed with pre-set graphite nipple, which allows one electrode to be joined together with another.
Pakistan Ultra High Power Graphite Electrode - DanCrabon - DanCarbon
UHP Graphite Electrode, EAF Graphite Electrode | Hgraphite. The electrodes come with a wide range of sizes, but diameter of 600mm and 700mm high performance. UHP graphite electrode is often used for ultra high power electric arc furnaces (EAF) with current density greater than 25 A/cm2. The length of EAF graphite electrodes can be up to 2900mm.
Pakistan electrode bolt type and uhp(ultra high power)grade graphite ...
UHP graphite electrode is mainly used for ultra high power electric arc furnaces with the current density greater than 25 A/cm 2. Description UHP graphite electrode is used for the recycling of steel in the electric arc furnace industry. Its main ingredient is high-value needle coke which is made from either petroleum or coal tar.
Pakistan UHP Graphite Electrode is the Key Consumable of EAF Steelmaking
UHP is the highest power graphite electrode grade, used for ultra-high power electric arc furnace steelmaking. UHP grade graphite electrodes manufacturer UHP grade graphite electrodes structure drawing, It's composed of rod and nipple. Types of graphite electrodes • Feature 1) Very high electricity load capacity.
Pakistan UHP grade graphite electrodes manufacturer and uses
These electrodes are most commonly used for melting scrap metal and other raw materials and are used in Electric Arc Furnaces (EAF). These electrodes carry a current that creates an arc between the electrode and the raw material, causing it to melt. The other electrode type is the “LDGE” or large diameter graphite electrode.
Pakistan An Overview of Graphite Electrode Standard Grades - Mbrashem
According to relevant data, with the continuous improvement of ultra-high power electric arc furnaces and related technologies, the electrode consumption dropped from 6.5 kg/t to 1.2 kg/t from 1965 to 2000. The power consumption is reduced from 630 kW. h/t to 290 kW. h/t and the tapping time is reduced from 180 min to 40 min.